+91-79-40083029 / +91-79-25840315

Leading Manufacturer and Designer of Plants, based
on PULVERIZERS, CRUSHERS, MIXERS AND MATERIAL CONVEYING EQUIPMENTS.

Feed Hopper

Feed Hopper
Model Capacity
(Basis of B.D. 1.0 (M3)
Plate Thick - ness Total
Ht.
Top Area
PS-0.1 100 kg (0.1M3) 3 525mm 500 x 500
PS-0.2 200 kg (0.2M3) 3 660mm 625 x 625
PS-0.5 500 kg (0.5M3) 3 950mm 900 x 900
PS-1 1 TON (1.0M3) 5 & 3 1500mm 900 x 900
PS-2 2 TON (2.0M3) 5 & 3 1575mm 1250 x 1250
PS-3 3 TON (3.0M3) 5 & 3 1680mm 1500 x 1500
PS-5 5 TON (5.0M3) 5 & 3 1950mm 1800 x 1800
PS-10 10 TON (10.1M3) 5 & 3 2250mm 2500 x 2500
PS-20 20 TON (20.0M3) 6 & 3 3135mm 3125 x 3125
PS-30 30 TON (30.0M3) 6 & 3 3450mm 3750 x 3750
PS-40 40 TON (40.0M3) 6 & 3 3750mm 4375 x 3750
PS-50 50 TON (50.0M3) 6 & 3 3875mm 4375 x 4375
PS-60 60 TON (60.0M3) 8,5 & 3 4375mm 4375 x 4375
PS-80 80 TON (80.0M3) 8,5 & 3 4700mm 5000 x 5000
U-100 100 TON (100.0M3) 8,5 & 3 5000mm 5625 x 5625
PRINCIPLE WORKING

These are being maded in different shape and size depending upon the property of the material, which is to be stored. Shape and size also depend upon site condition and the size of the Silo/ Hopper it self. It also designed as per the available height of the roof and the required height of the discharge.

Discharge system is usually provided at the bottom and sometime from one of its side. The discharge gate is design on the basis of physical properties of the material flow, particle size and rate of flow of the material. It also depends upon required automation to control the discharge. Hence while asking for Silos/ Hopper all such detail should be provided so that we may design the right size and shape of Silos/Hopper.

This may be made even of bigger sizes to suit the project. This silo is also available in stainless steel material.